Sept-10 Bourns expands Product Line to
add cost reduced SLIC Protection (Intra Building)
TISP61089Q
Bourns Circuit Protection Product Group announces the
addition of a new quad forward conducting buffered p-gate overvoltage protector
to the current portfolio of overvoltage protection products for SLIC
(Subscriber Line Interface Circuits) protection.
Sept-10 Bourns releases additions to
Modular Contact Model 70AB
Bourns would like to announce the addition of two new
versions of the 70AB series, a 70AB female version with 3 pins and a male
version with 2 pins.
Sept-10 Bourns releases its first
Safely Resistor Series
Bourns Fixed Resistor Product Line introduces Model
PWR4522, a wirewound and axial leaded fusible
power resistor with a UL rated flame – resistant coating.
Sept-10 Bourns adds TBU-CX Series to
the TBU Product Portfolio
Bourns is pleased to announce the release of the Bourns TBU-CX
Series of TBU high speed protectors. These products are low capacitance,
single programmable, bidirectional high speed protection components,
constructed using MOSFET semiconductor technology, and designed to
protect against faults caused by short circuits, AC power cross,
induction and lighting surges up to rated limits.
Sept-10 Bourns adds TBU-PK Series to
the TBU Product Portfolio
Bourns is pleased to announce the release of the Bourns TBU-PK
Series of TBU high speed protectors. These products are low capacitance,
dual, bidirectional high speed protection components, constructed using
MOSFET semiconductor technology, and designed to protect against faults
caused by short circuits, AC power cross, induction and lighting surges
up to rated limits.
August-10 Bourns participate in China
Electronic Fair.
Bourns will participate in the China
Electronic Fair in Chengdu
from Sept 7 to Sept 9 2010. For
more info, pls refer to http://www.bourns.com/News.aspx?name=Tradeshows
August-10 Thick Film Resistor Networks
Bourns announce a change to the reliability
characteristics of the medium profile single in line resistor network
4600M series. Pls check with sales in charges
for more info.
August-10 Bourns
Model 90 Series Panel Control Data Sheet Update and New Shaft Options.
Bourns Sensors and Controls Product Line is pleased to
announce data sheet updates and two new shaft options for our Model 90
Series 5/8 square panel control. The Model 90 Series data sheet has been
separated by model type for easier product selection. One data sheet will
contain specifications for Models 91,92.,93,94 and 95; a second data
sheet will contain specifications for the sealed Model 96; and a third
data sheet will contain specifications for switch option Models 97 and
99.
August-10 Model CAT16 Chip Resistor
Arrays
Bourns have added a second manufacturing location for its
Model CAT16 chip arrays. Both locations use
similar manufacturing process.
The standard part number CAT16-xxxJx with the addition of
a “ZI” suffix (CAT16-xxxJxZ1) is now assigned to CAT16 units
manufactured with palladium in the termination. Units containing
palladium in the termination have been shown to have a smaller shift (1%
maximum) in total resistance (TR) after exposure to a 4-5ppm
concentration of H2S for 250 hours. If a smaller shift in TR after
exposure to H2S is not a required feature for your application, pls continue to order the standard part number
without “Z1” suffix. The data sheet for Model CAT16 will not
be changed to reflect the small TR shift characteristic in the models
containing palladium because the CAT16-xxxJxZ1 units are considered
custom (non standard) units.
April-10 Bourns Releases New Power
Inductors Models SDE6603 and SRE6603
Bourns Inductive Components Product Line introduces new
models SDE6603 and SRE6603. These two power inductor models are compact,
with low DC resistance and high current carrying capability making them
ideal to use in DC/DC converters for mobile electronic devices with
prolonged battery life.
April-10 Bourns Adds MOV Products
Bourns is pleased to announce the release of two new MOV
(Metal Oxide Varistor ) Protection series products for general
applications. The Bourns MOV product portfolio offers 7 mm and 10 mm
radial leaded varistor devices which protect
against overvoltage transients such as lighting, power contact and power
induction. The metal oxide varistors offer a
choice of varistor voltages from 18V to 820V
and Vrms voltages from 11V to 510V. The devices
have high current handling, high energy absorption capability and fast
response times to protect against transient faults up to rated limit.
April-10 Bourns Releases New Power
Resistor Series
Bourns Fixed Resistors Product Line introduces model
PWR163, it is a compact low profile power resistor rated to 25W
continuous power in a compact DPAK style package measuring 8.13 mm *
12.29 mm. this model had a higher power rating and smaller form factor
than JEDEC standard D2PAK power resistors. The PWR163 family is able to
support lead free reflow soldering temperatures and is fully ROHS
compliant. Its wide resistance ranges, pulse power handling and low
inductance make it suitable for functions such as current limiting,
current sensing, and capacitor discharge. It may be used in
uninterruptible power supplies, welding machines, automation, lighting
telecom power supplies , aerospace, automotive and railway equipment
application.
Mar-10 Bourns Releases New High
Current Power Inductors Models SRP4020 and SRP7030F
Bourns Inductive Components Products Line introduces new models
SRP4020 and SRP7030F. These two high current power inductor models are
designed with flat wire and a magnetic alloy compound molded
construction. While the design makes them uniquely compact, they also
feature low DC resistance, high current carrying capability and they are
magnetically shielded. These inductors are ideally suited for use in
DC/DC converters for mobile electronic devices and computers, as well as
data storage and voltage regulator modules
Mar-10 Bourns Multifuse
Product Line Announces Twin Pack Surface Mount 250V
Polymer PTC Resettable Fuse.
Bourns has launched the MF-SD013/250, its first surface
mount devices containing twin 250V polymer PTC resettable fuses. This new
product builds on the very successful MF-SM013/250 devices by packaging
two of these devices into the same housing, reducing customer circuit
board area by more than 50%. The MF-SD013/250 provides tip and ring overcurrent protection and aids compliance with ITU-T
K.20, K.21 and K.45 as well as Telcordia
GR-1089 intra-building. The product is ROHS compliant and can be used s
part of an overall circuit protection solution untilizing
a combination of other Bourns circuit protection products such as TISP thyristors, TVS diodes and gas discharges tubes.
Feb-10 Bourns Add New Discrete TVS
Diode Products
Bourns is pleased to announce the release of four new ESD/EFT/Surge
Protection series products for general application. The portable
communication, computing and video equipment markets are challenging the
semiconductor industry to develop increasing smaller electronic
components. Bourns offers Transient Voltage
Suppressor diodes for surge and ESD protection applications, in compact
chip package size formats. Each of the series is ROHS compliant and
complies with following industry standards: IEC 61000-4-2 ESD (Min.Level 4), IEC 61000-4-4 EFT, and IEC 61000-4-5
Surge. Product data sheets with
detailed specifications and a cross reference search feature can be
viewed on the Bourns website at www.bourns.com
Feb-10 Bourns Model PEC11S Series
Surface Mount Encoder Release
Bourns Resistive Products Division proudly announce the
release of our Model PEC11S 12 mm Surface Mount Incremental Encoder
The PEC11S can be use in applications including
audio-visual equipment, consumer electronic appliances, portable
electronics, and communication equipment. Other application
include professional audio equipment such as keyboards, electronic
drum programmers, and portable audio mixers and recorders.
Jan-10 Bourns Model PDB182-GTRB
Series Blend – Balance Guitar Potentiometer
Bourns Resistive Products Division announce the release of
their new Model PDB182-GTRB Series Blend Balance Guitar Potentiometer in support
of the Professional Audio Market. This custom guitar potentiometer best
known as blend balance pot is designed for use as a balance control
between two guitar pick ups, where the volume level of each pick can be
blended by utilizing a single dual gang control. The unique M and N audio
tapers provide volume blending capability to the guitarist. This product
is designed with the features most widely requested by master luthiers.
Jan-10 Bourns Model 82 Series Vintage
Guitar Potentiometer
Bourns Resistive Products Division announces the
re-release of our Model 82 Vintage Guitar Potentiometer in response to
continued request by master luthiers. The Model
82 has been sought by many master luthiers and
has become a prized possession by those who have them installed in
guitars.
Jan-10 Bourns Model PSM Series
Motorized Master Slide Potentiometer
Bourns Resistive Products Division announces the release
of their new Model PSM series Motorized Master Slide Potentiometer in
support of the Professional Audio Market. This new high quality product
is suitable for use in automated professional audio and broadcast mixing
consoles.
Jan-10 Bourns Releases New Power
Resistor Series – Model PWR220T
Bourns Fixed Resistors Product Line introduces Model
PWR220T. It is a compact low profile power resistor rated to 20W
continuous power
in an industry standard TO220 housing. The PWR220T family is
able to support lead free wave soldering temperatures and is fully RoHS compliant. PWR220T has an excellent pulse power
rating and low inductance. its wide resistance range, pulse power
handling and low inductance make it suitable for many applications
including uninterruptible power supplies, welding machines, automation,
lighting, telecom power supplies, aerospace, automotive and railway
equipment.
|
